The Ultimate Guide to Cleaning On Cloud Shoes

On Cloud shoes are light, bright and easy to scuff. The mesh picks up dust, the pods fill with grit and white models show every puddle. The good news is that cleaning them is simple, as long as you skip the washing machine.
The brand itself, which was founded in Switzerland in 2010, advises against machine washing and tumble drying its shoes. Hand cleaning keeps the glue, foam and mesh in good shape. Here is the routine.
What you need
- A soft brush, such as a soft toothbrush or a shoe brush
- Lukewarm water in a bowl
- A mild soap or gentle detergent with no bleach
- Two clean cloths or microfibre towels
- Old newspaper or paper towels
Step by step
- Remove laces and insoles. Take out the removable insole so each part can be cleaned and dried properly.
- Knock off loose dirt. Tap the soles together outdoors, then brush off dry mud with the soft brush.
- Clean the pods. The hollow pods in the sole trap small stones. Pick them out gently with a blunt tool, and avoid anything sharp that could cut the rubber.
- Mix a gentle solution. A small squeeze of mild soap in lukewarm water is enough. Hot water can weaken adhesives.
- Scrub the upper. Dip the brush, shake off excess and work in small circles along the mesh, working with the weave rather than against it.
- Wipe the midsole and rubber. Use a damp cloth to wipe foam and outsole. Stubborn marks respond to a bit more soap and patience.
- Rinse by wiping. Use a second damp cloth with plain water to remove soap. Avoid soaking the shoe.
- Wash the laces and insoles. Hand wash them in the soapy water, rinse and press out the water in a towel.
Drying correctly
This step matters as much as the washing. Stuff the shoes loosely with paper to absorb moisture and hold their shape, and replace the paper once it gets damp. Leave them to air dry at room temperature in a spot with good airflow.
Keep them away from radiators, hair dryers and direct sun. Heat can warp foam and make glue lose its grip. Expect a full day or more before they are fully dry.
What to avoid
- Machine washing and tumble drying
- Bleach and harsh stain removers
- Hot water
- Soaking the shoes for hours
- Stiff wire brushes
Tackling specific marks
Scuffs on white foam
A damp cloth with a little mild soap lifts many surface scuffs. Test any eraser-type cleaner on a hidden area first, as some can dull a finish.
Oil or grease
Blot, do not rub. Sprinkle a little cornflour or baking soda on the stain for a few hours to absorb the oil, brush it off, then clean gently with soapy water.
Odour
Let the shoes air out fully and use fresh insoles. Baking soda sprinkled inside overnight and shaken out in the morning is a popular, inexpensive remedy.
How often to clean
A quick brush after dirty runs and a deeper clean every few weeks is plenty. Cleaning too often can wear the mesh. If you wear them for work or hard training, rotating two pairs gives the foam time to rest and dry, and it helps the shoes last. For a broader approach to caring for running shoes, read how to clean and maintain running shoes.
Using the same method on other shoes
The hand-wash approach works for many mesh sneakers. For related guides, see how to wash Hey Dude shoes and how to shine shoes without polish. Always check the care label or brand website, because materials differ from model to model.
Storing them
Keep your shoes in a cool, dry place. Avoid piling them in a hot car boot or a damp cupboard. Stored clean and dry, they hold their colour and shape better, and white pairs yellow less quickly. Retire any pair whose cushioning feels flat, because cleaning cannot restore worn foam.
Why gentle matters with performance shoes
Running shoes are built from several materials held together with adhesive: knit or engineered mesh on top, foam in the middle and rubber on the bottom. Each reacts differently to heat and chemicals. Harsh cleaners can strip the colour from mesh, and a hot wash can loosen the bond between layers. Slow, gentle cleaning takes ten minutes of effort and spares you from replacing the shoes early.
Cleaning coloured and light-coloured pairs
Bright colours can bleed if you use too much water, so work with a damp brush instead of a dripping one. On all-white pairs, rinse the cloth often so you do not smear dirt back on. If a stain remains after one session, repeat the gentle clean the next day rather than scrubbing harder. Patience protects the fibres.
Keeping them clean longer
Consider using them for the purpose they were made for. Muddy trails and building sites will stain even the best pair. A water-repellent spray made for textile shoes can help, though you should check that it is suitable for your material and test it on a small area first. Wiping the shoes with a dry cloth after wear stops dust from working into the mesh.
Frequently asked questions
Can I put On Cloud shoes in the washing machine?
The brand recommends against it. Machine washing and tumble drying can damage the glue, foam and mesh, so hand cleaning is safer.
How do I clean the white soles of On Cloud shoes?
Use a soft brush with mild soap and lukewarm water, wipe clean and air dry. Avoid bleach, which can discolour or weaken materials.
How long do On Cloud shoes take to dry?
Usually a day or longer at room temperature. Stuffing them with paper speeds it up, but avoid heaters and direct sun.
Photo: စာကလေး / Wikimedia Commons (CC0)


