How to Draw a Collared Shirt

A collared shirt looks simple until you try to sketch one. The collar twists, the placket needs to sit straight, and the sleeves have to hang naturally. Break it into basic shapes, though, and it comes together quickly. This tutorial works with a pencil and paper, but the same steps apply to a tablet.
What you need
- A pencil (HB is fine) and an eraser
- A ruler, if you like clean lines
- Paper, or a drawing app
- Optional: fine liner pens and colour
Looking at a real shirt helps a lot. Lay one flat on a table or hang it on a hanger and study it for a minute before you begin.
Step 1: Draw the body
Start with a loose rectangle for the torso, slightly wider at the shoulders and a little narrower at the waist. Draw it lightly, because you will refine it. Add the shoulder line as a gentle slope. The hem at the bottom can curve slightly, since shirt tails are often longer at the front and back than at the sides.
Step 2: Add the sleeves
Draw two tubes from the shoulders. For a relaxed look, let them angle slightly down and out. Make the cuffs end with a small rectangle. If you want folds, add a few short curved lines at the elbow and near the cuff, where fabric bunches naturally.
Sleeve proportion tip
A common mistake is making the sleeves too thin. Fabric has volume. Keep the sleeve about as wide as the upper arm of a person wearing the shirt, narrowing a little toward the wrist.
Step 3: The collar
This is the step that counts. A collar has two parts: the stand, which is a narrow band around the neck, and the collar leaf, which folds over it.
- Draw a small curve at the neck for the base of the collar.
- From each end of the curve, draw the collar points. They go down and outward, usually forming a V shape.
- Draw the second line below the first to show the thickness of the folded leaf.
- Connect the inner edge of each point back up to the stand.
Keep both sides symmetrical. Fold a piece of paper and draw one half if you struggle with that. If you want to understand collars a little more, read about problems and fixes in how to fix polo shirt collars.
Step 4: The placket and buttons
Draw a vertical line down the centre of the shirt from the collar to the hem. Add a second line parallel to it, a short distance across, to form the button placket. Place the buttons evenly along the placket as small circles, with two or four tiny dots inside each. Space them out consistently. Seven or so on an adult shirt is a typical number, though styles vary.
Step 5: Pocket, seams and details
If you want a chest pocket, add a small rectangle on one side with a slightly angled or squared bottom. Draw the shoulder seam and, if you like, a yoke across the back. Add stitching lines as dashed strokes along the hem, collar edge and cuffs. Details like these convert a flat shape into a believable garment.
Step 6: Refine and shade
Go over the final lines with firmer strokes and rub out your guidelines. Add soft shading where the fabric folds, under the collar and below the sleeves. For texture, think about the fabric. Twill has a diagonal weave, which you can read about in what is a twill shirt. A polo can be drawn the same way with a shorter placket, as seen in how to sew a polo shirt, which shows the real parts of the garment.
Common mistakes
- Collar points that do not match. Mirror them on both sides.
- A placket that drifts off-centre. Use a light vertical guideline first.
- Stiff, perfectly straight sleeves. Add a slight bend or fold.
- Pressing too hard in early sketches, which makes erasing messy.
Practice ideas
Draw the shirt from the front first, then try a three-quarter view, then a shirt on a hanger. Try different collar types, such as button-down, spread and band collars. For more inspiration on how real shirts are styled, see how to wear a polo shirt with a sweater.
Drawing the shirt on a figure
Once the flat shirt feels easy, put it on a person. Start with a simple stick figure or a mannequin shape: a circle for the head, a line for the spine and the shoulder bar. Then draw the shirt over it, letting the fabric follow the body instead of treating it like a rigid box.
Fabric falls into folds where the body bends: at the elbows, at the waist if tucked in, and across the chest if the arm is raised. Pull lines, which are short tight folds, radiate from a point of tension such as a bent elbow. Drop folds hang down loosely from a high point, such as the shoulder.
Adding colour and fabric texture
For a white shirt, use light grey or pale blue shading, not black. For patterned shirts, such as stripes or checks, draw the pattern lightly first and bend the lines around the body so they follow the curve. Stripes that stay perfectly straight make the shirt look flat.
Practice routine
Ten minutes a day is enough. Sketch your own clothes at home, since a shirt hanging on a door is a free model. After a week of this, collars and sleeves tend to feel much more natural.
FAQ
What is the hardest part of drawing a collared shirt?
The collar, because it has two layers and needs to be symmetrical. Practise it separately.
How many buttons should I draw?
Whatever looks right. Adult shirts often have about seven, but there is no fixed rule.
Can I use these steps for a fashion illustration?
Yes. Add a body shape under the shirt and let the fabric drape around it.
Start with simple shapes, take your time over the collar, and keep your early lines light. Repetition does the rest.
Photo: Wolfmann / Wikimedia Commons (CC BY-SA 4.0)


